For reference and guidance with your measurements, you can find below instructional and informative notes on various electrochemical applications, technical considerations, and features of Ivium instruments and software. These are categorized as follows:
A1 – IviumStat and TDI-load operation
A3 – MCF cell application note
A4.2 – EIS – setting up a measurement
A4.3 – EIS – Equivalent circuit fitting
A6 – Simultaneous multi-point EIS using the peripheral port
T13 – Updating DataSecure Firmware
IEN1 – Gained vs. true current ranges
IEN2 – Bandwidth and stability settings explained
IEN4 – Automatic current ranging
IEN5 – True linear sweeps, staircase sweeps, and current averaging
IEN6 – Equivalent circuit EIS fitting with non-linear elements
IEN7 – MultiSine EIS time reduction trade-off against accuracy loss
IEN9 – Transmission lines or ladder networks in IviFit
Equivalent circuit fitting with non-linear elements
