Innovative solutions for electrochemical research

pocketSTAT

Scan range: ±10mA/±4V

FRA/EIS: 10µHz-100kHz

Size: 11.5 x 5.85 x 1.25cm

Weight: 140g

Waterproof: ip44

You can buy this product from your local reseller:

Ivium Technologies B.V.

Contact resellerRequest information

Product description

Handheld
The pocketSTAT has the size and weight of a smart phone. It is controlled via a USB connection from any netbook, laptop or PC that is Windows operated.

Key specifications 
– Size: 11.5 x 5.85 x 1.25cm
– Weight: 140g
– Scan range: ±4V/±10mA
– 3 Electrode connection: WE/CE/RE and GND lead
– Max. acquisition rate: 5000 pnts/s

Rugged design
The pocketSTAT has a housing made of strong, yet lightweight aluminium. It is equipped with a full colour display that shows basic information, such as real time voltage and current, and the technique that is being used. The instrument enclosure is waterproof and complies with the ip44 rating.

Hardware

  • Automatic current range selection: 1nA to 10mA/1mV to 4V
  • Automatic variable noise filter and potentiostat/galvanostat stability settings
  • Real time data up to 500 pnts/s. Acquisition up to 5,000 pnts/s is stored in instrument memory
  • Applicable scanrates: 1µV/s to 10,000V/s
  • Result optimalisation by automated tuned filters, gain amplifiers and DC-subtraction

Software:
The pocketSTAT is controlled via Ivium’s own IviumSoft. This versatile, yet intuitive software package allows instrument control, data management and analysis, etc. IviumSoft can also interface with and be controlled from LabVIEWTM, C++, Delphi, etc. A full suite of IviumSoft is included with each instrument as standard.

Read the full description

Specifications

System performance
Product Current compliance
±10mA
Product Maximum output voltage
±8V
Product Electrode connections
3; WE, CE, RE (and GND) with 2mm banana plugs
Product Potentiostat bandwidth
>1MHz
Product Stability settings
High Speed, Standard and High Stability
Product Programmable response filter
1MHz, 100kHz, 10kHz, 1kHz, 10Hz
Product Signal acquisition
Dual channel 16bit ADC, 5,000 samples/s
Potentiostat
Product Applied potential range
±4V, 0.125mV res.
Product Applied potential accuracy
0.2%, or 2mV
Product Current ranges
±1nA to ±10mA in 8 decades
Product Measured current resolution
0.015% of current range, minimum 0.15pA
Product Measured current accuracy
0.2%
Galvanostat
Product Applied current resolution
0.0125% of applied current range
Product Applied current accuracy
0.2%
Product Potential ranges
±0.4mV, ±4mV, ±40mV, ±0.4V, ±4V
Product Measured potential resolution
0.003% of potential range, minimum 16nV
Product Measured potential accuracy
0.2% or 2mV
Impedance Analyser
Product Frequency range
10µHz to 100kHz
Product Amplitude
0.015mV to 1.0V, or 0.03% to 100% of current range
Product DC offset
16bit DC offset subtraction and 2 DC-decoupling filters
Electrometer
Product Input impedance
>1000Gohm //<20pF
Product Input bias current
<10pA
Product Bandwidth
>2MHz
Environment
Product Power requirements
Via USB
Product Interfacing
USB
Product Size (w x d x h)
11.5 x 5.85 x 1.25cm
Product Weight
140g
Product PC requirements
Windows 7/8/10, with free USB port
Product Waterproof
ip44
Specifications subject to change, Ivium Technologies ©2018

Postal address

  • Ivium Technologies B.V.
  • De Zaale 11
  • 5612 AJ Eindhoven
  • The Netherlands

Visiting address

  • Ivium Technologies B.V.
  • De Lismortel 31
  • 5612 AR Eindhoven
  • The Netherlands

Contact

  • T +31 40 2390600
  • F +31 40 2390601
  • E info@ivium.eu
©2018 Ivium Technologies B.V.