Innovative solutions for electrochemical research


Choose configuration:


Optional FRA/EIS: 10µHz to 500kHz

You can buy this product from your local reseller:

Ivium Technologies B.V.

Contact resellerRequest information

Product description

Wide application range: 

The XP40 is well suited for applications requiring a high current compliance such as electrolysis, and fuel cell applications. The XP40 is capable of ±40A/±10V.

Complete solution: 

The XP40 offers a complete package, all the standard electrochemical techniques are included. The XP40 also has an integrated  high-performance Frequency Response Analyser for EIS measurements from 10µHz to 500kHz. All measurement and dataprocessing software is included (for Windows based PCs).


The maximum current or potential of the instrument can be defined in the software by the operator. Thus valuable samples may be protected, and unsafe situations prevented.


Multiple analog and digital input & output ports are available for monitoring & control of peripheral equipment. This functionality is fully integrated in the software.


The XP40 can be expanded with a wide variety of options and modules, including True Linear Scan generator, various power boosters, and multiplexer.


  • Automatic current range selection: 10nA to 10A/1mV to 10V
  • Automatic variable noise filter and potentiostat/galvanostat stability settings
  • Simultaneous acquisition of current/potential
  • Real time data display up to 500 pnts/s. Acquisition up to 100,000 pnts/s is stored in instrument memory
  • Applicable scanrates: 1µV/s to 10,000V/s
  • Minimum interval time/resolution: 10µs
  • Result optimisation by automated tuned filters, gain amplifiers and DC-subtraction


The XP40 is controlled via Ivium’s own IviumSoft. This versatile, yet intuitive software, allows instrument control, data management and analysis, peripheral instrument control, etc. IviumSoft can also interface with and be controlled from LabVIEWTM, C++, Delphi, etc. A full suite of IviumSoft is included as standard with each instrument.

Read the full description


System performance
Current compliance
Maximum output voltage
Potentiostat bandwidth
Stability settings
High Speed, Standard and High Stability
Programmable response filter
1MHz, 100kHz, 10kHz, 1kHz, 10Hz
Signal acquisition
Dual channel 16bit ADC, 100,000 samples/s
Applied potential range
±10V, 0.333mV res.
Applied potential accuracy
0.2%, or 2mV
Current ranges
±10nA to ±10A in 10 decades
Measured current resolution
0.015% of current range, minimum 1.5pA
Applied current resolution
0.033% of applied current range
Applied current accuracy
Potential ranges
±1mV, ±10mV, ±100mV, ±1V, ±10V
Measured potential resolution
0.003% of potential range, minimum 40nV
Impedance Analyser
Frequency range
10µHz to 500kHz
0.015mV to 1.0V, or 0.03% to 100% of current range
DC offset
16bit DC offset subtraction and 2 DC-decoupling filters
Input impedance
>1000Gohm //<20pF
Input bias current
Peripheral connections
Temperature input
K-type thermocouple, 0-150C ±2C
Analog in/out
2/1 (±10V, 16bit resolution, bandwidth 40kHz/±10V, 16bit resolution)
Digital input/output
1/3 (0 to +5V)
±0.5V sinewave, 10µHz-1MHz with var. att.
Channel-X input, Channel-Y input
+4V: to record impedance from peripheral devices
Power requirements
100-240V, 45-65Hz, 20VA
Size (w x d x h)
45 x 37 x 10cm
PC requirements
Windows 7/8/10, with free USB port
Specifications subject to change, Ivium Technologies ©2019

Model comparison

System performance
Current compliance
Maximum output voltage

Postal address

  • Ivium Technologies B.V.
  • De Zaale 11
  • 5612 AJ Eindhoven
  • The Netherlands

Visiting address

  • Ivium Technologies B.V.
  • De Lismortel 31
  • 5612 AR Eindhoven
  • The Netherlands


  • T +31 40 2390600
  • F +31 40 2390601
  • E
©2019 Ivium Technologies B.V.