Innovative solutions for electrochemical research


Compliance: ±100mA/±21V

FRA/EIS: 10µHz - 250kHz (optional)

You can buy this product from your local reseller:

Ivium Technologies B.V.

Contact resellerRequest information

Product description

Low cost solution

The Vertex.One is an all-round potentiostat/galvanostat/ZRA with optional FRA/EIS. Its low cost and wide specifications result in a versatile single-channel instrument, and multiple instruments are an attractive alternative to a multi-channel solution. The cell is connected via our shielded cell cable, or standard 4mm banana leads allowing the user to supplement or extend the cell cable. The Vertex.One is capable of all standard electrochemical techniques and includes a complete suite of IviumSoft control and data processing software (for Windows based PCs).

Wide application range

The robust design, the wide specification range, the floating operation, and the availability of a wide range of electrochemical techniques makes the Vertex.One ideal for many applications, including:

  • educational
  • basic electrochemistry
  • batteries
  • corrosion
  • sensors


The Vertex.One can optionally be expanded with integrated True Linear Scan module and/or FRA/EIS capability.


  • Automatic current range selection over all available current ranges
  • Automatic variable noise filter and potentiostat/galvanostat stability settings
  • Simultaneous acquisition of current/potential and peripheral signals
  • Real time data display up to 500 pnts/s. Acquisition up to 100,000 pnts/s is stored in instrument memory
  • Applicable scanrates: 1µV/s to 10,000V/s
  • Minimum interval time/resolution: 10µs
  • Result optimisation by automated tuned filters, gain amplifiers and DC-subtraction
  • User selectable floating operation
  • Standard banana plugs on the instrument allow the user to simply use off-the-shelf banana leads to supplement or extend the shielded cell cable (supplied)


The Vertex.One is controlled via Ivium’s own IviumSoft. This versatile, yet intuitive software allows instrument control, data management and analysis, peripheral instrument control, etc. IviumSoft can also interface with and be controlled from LabVIEWTM, C++, Delphi, etc. A full suite of IviumSoft is included as standard with each instrument.

Read the full description


System performance
Product Current compliance
Product Maximum output voltage
Product Maximum compliance voltage
Product Electrode connections
4; WE, CE, RE, S (and GND) with 4mm banana plugs
Product Potentiostat bandwidth
Product Stability settings
High Speed, Standard and High Stability
Product Programmable response filter
1MHz, 100kHz, 10kHz, 1kHz, 10Hz
Product Signal acquisition
Dual channel 16bit ADC, 100,000 samples/s
Product Applied potential range
±10V, 0.333mV res.
Product Applied potential accuracy
0.2%, or 2mV
Product Current ranges
±100pA to ±100mA in 10 decades
Product Measured current resolution
0.015% of current range, minimum 0.01pA
Product Measured current accuracy
Product Applied current resolution
0.033% of applied current range
Product Applied current accuracy
Product Measured potential resolution
0.003% of potential range, minimum 400nV
Product Measured potential accuracy
0.2% or 2mV
Impedance Analyser
Product Frequency range
10µHz to 250kHz
Product Amplitude
0.015mV to 1.0V, or 0.03% to 100% of current range
Product DC offset
16bit DC offset subtraction and 2 DC-decoupling filters
Product Input impedance
>1000Gohm //<10pF
Product Input bias current
Product Bandwidth
Special functions
Product Ohmic drop compensation
2V/current range, 16bit resolution
Peripheral connections
Product Shared analog input/output
User selectable analog input: ±10V, 16bit resolution, or analog output: ±10V, 16bit resolution, bandwidth 40kHz
Product Power requirements
100-240V, 45-65Hz, 4VA via 5V supply (included)
Product Interfacing
Product Size (w x d x h)
10 x 19 x 2.5cm
Product Weight
Product PC requirements
Windows 7/8/10, with free USB port
Specifications subject to change, Ivium Technologies ©2018

Postal address

  • Ivium Technologies B.V.
  • De Zaale 11
  • 5612 AJ Eindhoven
  • The Netherlands

Visiting address

  • Ivium Technologies B.V.
  • De Lismortel 31
  • 5612 AR Eindhoven
  • The Netherlands


  • T +31 40 2390600
  • F +31 40 2390601
  • E
©2018 Ivium Technologies B.V.