Instruments

Scan range: ±30mA/±10V

FRA/EIS: 10µHz-1MHz

Size: 16 x 6.7 x 1.9cm

Weight: 300g

Available in ±30mA/±10V, ±800mA/±10V, ±250mA/±20V, ±30mA/±100V configuration

FRA/EIS: 10µHz - 3MHz

Scan range: ±30mA/±10V

FRA/EIS: 10µHz-1MHz

Low current ranges down to 10pA

Size: 22.3 x 6.7 x 1.9cm

Weight: 350g

Scan range: ±30mA/±10V

Size: 11.5 x 5.9 x 1.4cm

Weight: 125g

Compliance: 5mA@3V (2mA@6V)

FRA/EIS: 10µHz-100kHz

Size: 95 x 60 x 8mm

Weight: 50g

Instrument for introduction to electrochemistry, IviumSoft and proof-of-principle studies

Compliance: ±100mA/±21V

Optional FRA/EIS: 10µHz - 250kHz

Optional True Linear Scan generator

Compliance: ±350mA/±13V

FRA/EIS: 10µHz to 1MHz as standard

Optional Bipotentiostat

Optional True Linear Scan generator

Available in several current/voltage configurations

Current ranges: 100pA up to 10A

Optional FRA/EIS: 10µHz to 1MHz

Optional True Linear Scan generator

Up to 8 modules/16 channels per frame (stackable up to 64 channels) can be installed

Modules can be mix and matched for maximum versatility

Multi-channel Potentiostat/Galvanostat/ZRA

Integrated impedance analyser in each channel as standard: 10µHz - 250kHz (1MHz optional)

8-channel Potentiostat/Galvanostat/ZRA

19" rack-mountable housing

Up to 128 channels/rack

Affordable high-spec electrochemical test system

Each channel: Dedicated embedded FRA/EIS

IviumStat2.h scan range: ±5A/±10V

IviumStat.XRe scan range: ±2A/±50V

FRA/EIS: 10µHz to 8MHz

XP40 (±40A/±10V), XP20 (±20A/±20V), and XP10 (±10A/±40V)

Applied voltage range on all instruments is ±10V

Optional FRA/EIS: 10µHz to 500kHz

Integrated current interrupt

Direct K-type thermocouple input connector

Current compliance: 0 to +80A

Voltage compliance: +0.5 to +20V

FRA/EIS: 10µHz-10kHz