The OctoPPE  is a module, designed for use in combination with an OctoStat, that allows 2 analog input measurements for each OctoStat channel:

• input 1 is a low impedance analog input/analog output with BNC connector
  • Each channel can measure from -10V to +10V
  • Input resistance of 1MOhm
  • The voltage signal transfers directly to Analog input 1 of the potentiostat peripheral port
• input 2 is a low impedance analog input (only) with BNC connector
  • Each channel can measure from -10V to +10V
  • Input resistance of 1MOhm
  • The voltage signal transfers directly to Analog input 2 of the potentiostat peripheral port

The OctoPPE has a height of 1U and is designed to be mounted into a 19″ rack. A rack or housing is not included with the OctoPPE.