The OctoPDA-T  is a module, designed for use in combination with an OctoStat, that allows 2 analog input measurements for each OctoStat channel:

• input 1 is a high impedance differential analog input with BNC connector
  • Capable of measuring the difference between inputs up to ±10V
  • Input impedance >1E12 Ohm
  • The voltage signal transfers directly to Analog input 1 of the potentiostat peripheral port
• input 2 is an analog input with a direct connection for a K-type thermocouple for temperature measurements
  • Suitable for K-type thermocouples
  • Temperature range from -50 to 900 degrees centigrade
  • Measurement accuracy:
    • -25 to 400C is ±2C
    • >400C is ±1.6%
  • The voltage signal transfers directly to Analog input 2 of the potentiostat peripheral port

The OctoPDA-T has a height of 1U and is designed to be mounted into a 19″ rack. A rack or housing is not included with the OctoPDA-T.