Innovative solutions for electrochemical research

Vertex.100mA.DC

Choose configuration:

Scan range: ±100mA/±10V

Optional FRA/EIS: 10µHz to 1MHz

Optional True Linear Scan generator

Optional Bipotentiostat

$ 5,335.00

Amount:

Product description

Instrument

The Vertex.100mA.DC is a versatile entry-level potentiostat which has ±100mA / ±10V compliance.

Automation

The Vertex.100mA.DC has a user selectable input or output.

Expandability

The Vertex.100mA.DC can optionally be expanded with a True Linear Scan module, Bipotentiostat, and/or FRA/EIS capability. Next to that the Vertex is compatible with other Ivium options and modules, such as the HiMUX and CIM, and several Ivium boosters for higher power requirements.

Hardware

  • Automatic current range selection over all available current ranges
  • Automatic variable noise filter and potentiostat/galvanostat stability settings
  • Simultaneous acquisition of current/potential and peripheral signals
  • Real time data display up to 500 pnts/s. Acquisition up to 100,000 pnts/s is stored in instrument memory
  • Applicable scanrates: 1µV/s to 10,000V/s
  • Minimum interval time: 10µs (0.125µs resolution)
  • Result optimisation by automated tuned filters, gain amplifiers and DC-subtraction
  • User selectable floating operation

Software

The Vertex.100mA.DC is controlled via Ivium’s own IviumSoft. This versatile, yet intuitive software package allows instrument control, data management and analysis, peripheral instrument control, etc. IviumSoft can also interface with and be controlled from LabVIEWTM, C++, Delphi, etc. A full suite of IviumSoft is included with each instrument as standard.

Read the full description

Specifications

System performance
Number of channels in instrument
1
Current compliance
±100mA
Maximum output voltage
±10V
Maximum compliance voltage
±10V
Electrode connections
4; WE, CE, RE, S (and GND) with 4mm banana plugs
Potentiostat bandwidth
>500kHz
Stability settings
High Speed, Standard and High Stability
Programmable response filter
1MHz, 100kHz, 10kHz, 1kHz, 10Hz
Signal acquisition
Dual channel 16bit ADC, 100,000 samples/s
Potentiostat
Applied potential range
±10V, 0.333mV res.
Applied potential accuracy
0.2%, or 2mV
Current ranges
±10nA to ±1A
Measured current resolution
0.015% of current range, minimum 1.5pA
Measured current accuracy
0.2%
Galvanostat
Applied current resolution
0.033% of applied current range
Applied current accuracy
0.2%
Potential ranges
±1mV, ±4mV, ±10mV, ±40mV, ±100mV, ±400mV,±1V, ±4V, ±10V
Galvanostatic current ranges
±10nA to ±1A
Measured potential resolution
0.03% of potential range, minimum 40nV
Measured potential accuracy
0.2% or 2mV
Electrometer
Input impedance
>1000Gohm //<10pF
Input bias current
<20pA
Bandwidth
>5MHz
Special functions
Ohmic drop compensation
2V/current range
Peripheral connections
Analog in/out
2/1 (±10V, 16bit resolution, bandwidth 40kHz/±10V, 16bit resolution)
Digital input/output
1/3 (0 to +5V)
I-out/E-out
Analog monitor for cell current and potential
AC-out
±0.5V sinewave, 10µHz-1MHz with var. att.
Channel-X input, Channel-Y input
±4V: to record impedance from peripheral devices
Environment
Power requirements
100-240V, 50-60Hz, 700mA (supply included)
Interfacing
USB
Size (w x d x h)
13 x 27 x 4cm
Weight
1.5kg
PC requirements
Windows 7/8/10, with free USB port
Specifications subject to change, Ivium Technologies ©2020

Product gallery

Model comparison

Vertex.5A
Vertex.10A
Vertex.Q (multi-channel)
Vertex.20V
Vertex.100mA.DC
Vertex.100mA.EIS
System performance
Number of channels in instrument
1
1
4
1
1
1
Current compliance
±5A
±10A
±30mA
±2A
±100mA
±100mA
Maximum output voltage
±10V
±5V
±10V
±10V
±10V
±10V
Maximum compliance voltage
±10V
±5V
±10V
±20V
±10V
±10V
Electrode connections
4; WE, CE, RE, S (and GND) with 4mm banana plugs
4; WE, CE, RE, S (and GND) with 4mm banana plugs
4; WE, CE, RE, S with 4mm banana plugs
4; WE, CE, RE, S (and GND) with 4mm banana plugs
4; WE, CE, RE, S (and GND) with 4mm banana plugs
4; WE, CE, RE, S (and GND) with 4mm banana plugs
Potentiostat
Applied potential range
±10V, 0.333mV res.
±5V, 0.333mV res.
±10V, 0.333mV res.
±10V, 0.333mV res.
±10V, 0.333mV res.
±10V, 0.333mV res.
Current ranges
±10nA to ±10A
±10nA to ±10A
±10nA to ±10mA
±10nA to ±1A
±10nA to ±1A
±10nA to ±1A
Galvanostat
Galvanostatic current ranges
±10nA to ±10A
±10nA to ±10A
±10nA to ±10mA
±10nA to ±1A
±10nA to ±1A
±10nA to ±1A
Impedance Analyser
Frequency range
10µHz to 1MHz
10µHz to 1MHz
10µHz to 1MHz
10µHz to 1MHz
-
10µHz to 1MHz
Amplitude
0.15mV to 1.0V, or 0.03% to 100% of current range
0.15mV to 1.0V, or 0.03% to 100% of current range
0.15mV to 1.0V, or 0.03% to 100% of current range
0.15mV to 1.0V, or 0.03% to 100% of current range
-
0.15mV to 1.0V, or 0.03% to 100% of current range
DC offset
16bit DC offset subtraction and 2 DC-decoupling filters
16bit DC offset subtraction and 2 DC-decoupling filters
16bit DC offset subtraction and 2 DC-decoupling filters
16bit DC offset subtraction and 2 DC-decoupling filters
-
16bit DC offset subtraction and 2 DC-decoupling filters
Peripheral connections
Analog in/out
2/1 (±10V, 16bit resolution, bandwidth 40kHz/±10V, 16bit resolution)
2/1 (±10V, 16bit resolution, bandwidth 40kHz/±10V, 16bit resolution)
16bit analog input, 1 per channel (optional)
2/1 (±10V, 16bit resolution, bandwidth 40kHz/±10V, 16bit resolution)
2/1 (±10V, 16bit resolution, bandwidth 40kHz/±10V, 16bit resolution)
2/1 (±10V, 16bit resolution, bandwidth 40kHz/±10V, 16bit resolution)
Digital input/output
1/3 (0 to +5V)
1/3 (0 to +5V)
-
1/3 (0 to +5V)
1/3 (0 to +5V)
1/3 (0 to +5V)
I-out/E-out
Analog monitor for cell current and potential
Analog monitor for cell current and potential
-
Analog monitor for cell current and potential
Analog monitor for cell current and potential
Analog monitor for cell current and potential
AC-out
±0.5V sinewave, 10µHz-1MHz with var. att.
±0.5V sinewave, 10µHz-1MHz with var. att.
-
±0.5V sinewave, 10µHz-1MHz with var. att.
±0.5V sinewave, 10µHz-1MHz with var. att.
±0.5V sinewave, 10µHz-1MHz with var. att.
Channel-X input, Channel-Y input
±4V: to record impedance from peripheral devices
±4V: to record impedance from peripheral devices
-
±4V: to record impedance from peripheral devices
±4V: to record impedance from peripheral devices
±4V: to record impedance from peripheral devices
Environment
Power requirements
100-240V, 50-60Hz, 2A
100-240V, 50-60Hz, 4A
100-240V, 50-60Hz, 700mA
100-240V, 50-60Hz, 2A
100-240V, 50-60Hz, 700mA (supply included)
100-240V, 50-60Hz, 700mA (supply included)
Size (w x d x h)
15 x 36 x 4.5cm
15 x 36 x 4.5cm
15 x 36 x 4.5cm
15 x 36 x 4.5cm
13 x 27 x 4cm
13 x 27 x 4cm
Weight
2.5kg
3kg
1.5kg
2.5kg
1.5kg
1.5kg

Postal address

  • Ivium Technologies B.V.
  • De Zaale 11
  • 5612 AJ Eindhoven
  • The Netherlands

Visiting address

  • Ivium Technologies B.V.
  • De Lismortel 31
  • 5612 AR Eindhoven
  • The Netherlands

Contact

  • T +31 40 2390600
  • F +31 40 2390601
  • E info@ivium.com
©2020 Ivium Technologies B.V.